CARBONX™ Carbon Fiber ABS 3D Printing Filament 2,85 750gCode: 7134
Product detailed description
CarbonX™ CFR Carbon Fiber Reinforced ABS Filament
CarbonX™ CFR-ABS is a high-performance carbon fiber reinforced ABS filament ideal for anyone that desires a structrual component with high modulus, excellent surface quality, dimensional stability, light weight, and ease of printing. Made using 15% High-Modulus Carbon Fiber (not carbon powder or milled carbon fiber). Made in the USA using premium Sabic MG-94 ABS and high modulus carbon fiber.
CarbonX™ CF grades are abrasive and will quickly wear out a brass nozzle. We recommend Hardened Steel Nozzles
Recommended Print Conditions:
- Extruder: 220-240°C. 3DXMAX™ CFR is a filled product and has a higher melt viscosity vs. unfilled resin. Therefore, it is sometimes necessary to print at higher temperatures to allow the resin to flow properly.
- Bed Temp: 100-110°C
- Bed Prep: 3DXTech Kapton Tape, ABS/Acetone Slurry
- Nozzle: We currently recommend minimum 0.4mm orifice.
- Layer Height: Ideal layer height is 60% of nozzle diameter. We do not recommend printing layers below 0.25mm with carbon fiber grades. Lower than 0.25mm may create too much back pressure in the hot end and result in poor feeding, jams, drive gear clicking, and eating a notch into the filament.
|Diameter tolerance:||2.85 mm|
|Net Weight:||0.75 kg|
|Extruder Temperature:||220 - 240°C|
|Bed temperature:||100 - 110°C|
|Tolerance:||max. ± 0.05 mm|