XT-CF20 carbon 2,85 mm 750g

Code: 6098
€60,44 €49,95 excl. VAT
to order
Delivery to:
8.12.2020
The item has been sold out…

colorFabb XT-CF20

A special point of attention is the abrasive nature of the carbon fibers. In general these fibers will accelerate the nozzle-wear of brass nozzles, much faster than unfilled filaments. Therefore we  recommend to use hardened steel nozzles.

Detailed information

Product detailed description

colorFabb XT-CF20 is a copolyester based carbon fiber composite material that is based on the unique Amphora 3D polymer from Eastman Chemical and is loaded with no less than 20% specially sourced carbon fibers suitable for 3D Printing.
Combining carbon fibers in filaments material is not a new idea, but colorFabb has been able to combine a lot of desired properties into 1 new material :

  • Extreme High Flex Modulus (6.2 GPa), twice as stiff as PLA/PHA
  • Moderate strain at break (8-10%), so no extreme brittle filament, but toughness
  • High Glass Temp. (Tg = 80C)
  • Very high Melt strength
  • Very high Melt Viscosity
  • Good dimensional accuracy and stability
  • Low odor / Styrene Free solution
  • Easy processing on many platforms
  • High attractive matt black surface

 

CARBON FIBER IS ABRASIVE

A special point of attention is the abrasive nature of the carbon fibers. In general these fibers will accelerate the nozzle-wear of brass nozzles, much faster than unfilled filaments. There colorFabb recommends to use nozzle’s from Stainless steel or hardened copper alloys.

APPLICATIONS :

Just think of all the great applications for a variety industries, that now will have a material that performs according to expectations. Functionality, stiffness, dimensional stability, heat resistant, what more can you ask? Applications in the RC Industry / Drones / Aerospace / Automotive / Prototyping and many more can now be developed on your desktop 3D Printer.

AMPHORA 3D POLYMER

ColorFabb XT-CF20 is produced wih AMPHORA 3D Polymer from Eastman Chemical.

Amphora

Amphora 3D Polymers is a specially developed co-polyester just for 3D Printing. It’s toughness and high meltstrength makes it the perfect material for producing fiber reinforced composites, providing the necessary viscosity for 3D printing, combined with a high toughness in the filament and end application

 

Adviced 3d printing temperature:

240-260C

Adviced 3d print speed:

40 - 70 mm/s

Advised Heated bed:

60-70C 

Additional parameters

Category: CARBON filaments
Warranty: 2 years
Weight: 1 kg
Colour: black
Material: CARBON, XT
Diameter: 2.85 mm
Weight: 0.75 kg
Manufacturer: colorFabb
Diameter: Ø 2.85 mm
Material: XT-CARBON
Colour: Black
Net Weight: 750 g
Adviced 3d printing temperature: 240 - 260 °C
Advised Heated bed: 60 -70°C
Diameter tolerance: 0.05 mm
Origin: EU
The item has been sold out…

Be the first who will post an article to this item!

Only registered users may post articles. Please log in or register.

5
1x
4
0x
3
0x
2
0x
1
0x